La Crosse Technology, Ltd.
Page 7
It is difficult for RF (radio frequency) signal to travel through a hill.
Temperature Alerts
Explanation:
The outdoor and indoor temperature alerts are set in two separate steps.
Set the alert value.
Arm/Disarm the alert.
Select Temperature Alert Values:
Hold the TEMP ALERT button for five seconds to select and set temperature alert values.
1.
OUTDOOR HI
alert will flash. Press
the ▲ or ▼ buttons to set the alert value, and press the TEMP
ALERT button to confirm and switch to OUTDOOR LOW setting.
2.
OUTDOOR LO
alert will flash. Press
the ▲ or ▼ buttons to set the alert value, and press the TEMP
ALERT button to confirm and switch to INDOOR HI setting.
3.
INDOOR HI
alert will flash. Press
the ▲ or ▼ buttons to set the alert value, and press the TEMP
ALERT button to confirm and switch to INDOOR LOW setting.
4.
INDOOR LO
alert will flash. Press
the ▲ or ▼ buttons to choose the value, and press the TEMP
ALERT button to confirm and exit.
Note:
After selecting temperature alert values, use the next step to arm or disarm individual alerts.
Arm/Disarm Temperature Alerts
1.
In normal mode, hold then release the TEMP ALERT button to toggle the alerts:
Outdoor HI
Outdoor LO
Indoor HI
Indoor LO
2.
Press the
▲ button to arm the selected alert. The alert icon (bell) appears next to the alert, when the
alert is active.
3.
Press the
▼ button to disarm the selected alert.
Note:
When no temperature alerts are set, the Temperature Alert area will show ALERTS OFF.
Active Temperature Alert
When temperature alert sounds, the corresponding alert icon (bell) will flash.
The alert beeps once every minute, until the temperature is out of alert range.
Press any button to stop alert. The alert symbol will still show.
Weather Station
How tall are the time numbers?
The time numbers are 0.5 inches tall.
Power Requirements
2-AA Alkaline batteries power this weather station.
12-Hour or 24-Hour time format
Time can display in 12-hour (am, pm) or 24-hour format.
Default is 12-hour time.
Use the
Program Menu
to switch time formats.
Fahrenheit/Celsius
Use the
program menu
to switch between Fahrenheit and Celsius.
