Setup
1. Install 2-AA batteries into the TX141TH-Bv2 sensor.
The red LED light will blink when transmitting.
2. Insert the 5.0 volt power cable into the wall outlet, then into the
station. Optional: Insert 3-AA batteries into the back of the station.
4. Keep sensor and weather station within 5 feet for at least 15
minutes after installing batteries. This allows the sensor and station
to sync properly and ensures a strong connection.
5. After 15 minutes, place sensor in desired location (position
sensor
page 11
).
6. Program the station in the settings menu.
Button Function Explanation
For better programming instructions, please note these terms for
button use:
•
Press:
Press and release the designated button.
•
Hold:
Hold the button for 3 seconds then release the button.
308-1417BL
www.lacrossetechnology.com/support
Page | 2
AA
AA
LED
TX
button
Note:
Press the TX button inside the battery cover of the sensor to
force a signal transmission.
LIGHT
Power
Cord
AA
AA
AA