6
Search for Outdoor Temperature
If you are seeing dashes for your outdoor readings, please try the
following steps:
1. Hold the
-
button to search for your outdoor sensor. The Reception
Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside
next to the display and remove power from both the sensor and clock.
3. Press any button on the clock 20 times and leave the parts sit for a few
moments with the power off.
4. Install a new set of alkaline batteries into the sensor, then into your clock.
For additional help visit:
5. If your outdoor data is still not appearing after these steps, please
contact our support staff via the links below.
Low Battery Indicator
By the Indoor Temperature, replace batteries in the station.
By the Outdoor Temperature, replace sensor batteries.
• The Sensor Weather Shield is designed to protect your
outdoor sensor from rain and snow.
• This shield will offer limited protection from the sun’s heat.
• Optional purchase at:
Sensor Shield (not included)