WIRELESS WEATHER STATION WITH THREE SENSORS
7 | PAGE
CHANGE BATTERIES
We designed this station for convenience, so that a simple change of batteries does not lose your data or
require you to power down your station.
Sensor:
1. When Battery Indicator shows next to the Outdoor Temperature, replace batteries in your Outdoor
Sensor on that channel.
2. Then hold the SENSOR button for 3 seconds and your station will search for your sensor.
Station:
1. When Battery Indicator shows next to the Indoor Temperature, change batteries in the station.
2. After replacing the batteries in the station, it will automatically search for the sensors. Press the TX
button on each sensor to force a signal transmission. When outdoor temperature readings are received,
set time and date.
FACTORY RESTART
A factory restart of the station returns it to default settings, and “out of the box” condition and may resolve
connection issues.
If the Outdoor Temperature shows dashes on the station please follow these steps:
1. Bring each sensor inside next to station and remove batteries from all devices.
2. Press any button on the station at least 20 times, and then wait 15 minutes.
3. After the wait, install fresh batteries into each sensor and your station. Within a minute or two your
outdoor temperatures should return.
SENSOR WEATHER SHIELD-NOT INCLUDED
The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow. This shield will
offer limited protection from the sun’s heat. Purchase at:
