background image

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause harmful interference to radio 

or television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to which 

   the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help. 

This device must not be co-located or operating in conjunction with any other antenna or transmitter. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) This device must accept any interference received, including interference that may cause 

      undesired operation.

Caution! 

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes 

or modifications to this equipment. Such changes or modifications could void the user authority to 

operate the equipment.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or 

processed using electronic, mechanical or chemical process without the written permission of the 

publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and 

corrections are included in subsequent editions. We disclaim any responsibility for any technical error 

or printing error, or their consequences.

All trademarks and patents are recognized.

Canada Statement 

This device complies with CNR Industry Canada license -exempt devices. Operation is subject to the 

following two conditions: 

(1) This device may not cause interference; and 

(2) This device must accept any interference, including interference that may cause undesired 
      operation of the device. 

FCC Statement

• 

Do not mix old and new batteries

• 

Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

• 

Always purchase the correct size and grade of battery most suitable for intended use.

• 

Replace all batteries of a set at the same time.

• 

Clean the battery contacts and also those of the device prior to battery installation.

• 

Ensure the batteries are installed with correct polarity (+ and -).

• 

Remove batteries from equipment which is not to be used for an extended  period 

• 

Remove expired batteries promptly.

Care and Maintenance

Page | 3       www.lacrossetechnology.com/support         308-1409BT/308-1409WT       

        

Visit Us on Social Media

http://bit.ly/LaxTech_Facebook

 

http://bit.ly/LaxTech__Twitter

http://bit.ly/LaxTech_YouTube

http://bit.ly/LaxTech_Pinterest

For personalized interaction

Join the conversation

Latest video content

Pin and share

Summary of Contents for 308-1409BT

Page 1: ... the TX141 Bv2 sensor Check polarity LED AA AA 2 Insert 2 AAA batteries into the station Check polarity 3 Allow sensor and station to remain 5 10 feet apart for 5 minutes to lock in the sensor signal 4 Set time 5 After 5 minutes place sensor outside in a shaded location AAA AAA http bit ly LaxTechTalk For online video support ...

Page 2: ...cords in memory The records will automatically reset at 12 00AM Page 1 www lacrossetechnology com support 308 1409BT 308 1409WT LO Temps HI Temps Set Time 1 Press and hold the SET button for 2 seconds to enter setting mode 12H will flash press F C to select Press SET to confirm 2 Hour will flash press F C to set Press SET to confirm 3 Minutes will flash press F C to set Press SET to confirm Temper...

Page 3: ...ir not including walls or floors Be sure the outdoor sensor is mounted vertically Position Outdoor Sensor Warranty and Support La Crosse Technology Ltd provides a 1 year limited time warranty from date of purchase on this product relating to manufacturing defects in materials workmanship Before returning a product please contact our friendly customer support with questions or visit our online help...

Page 4: ...is equipment Such changes or modifications could void the user authority to operate the equipment All rights reserved This manual may not be reproduced in any form even in part or duplicated or processed using electronic mechanical or chemical process without the written permission of the publisher This booklet may contain errors or misprints The information it contains is regularly checked and co...

Reviews: