Setup Preparation:
Here are some items needed to setup your station (not included):
1. Phillips head screwdriver for assembly.
2. Fresh Batteries: 5 (five) AA alkaline or lithium batteries for
the sensors.
3 (three) AAA alkaline batteries for the
station (optional).
For best results:
• Remove weather station and sensors from the package and place
together on a table or bench, within easy reach.
• Place batteries and screwdriver within reach of setup location.
• Keep sensors and weather station 5-10 feet apart for the first
15 minutes after installing batteries.
Software version will show for 2
seconds. Lower left corner.
Setup:
Power up. Observe correct polarity.
• Thermo-hygro sensor- 2-AA batteries
• Multi-sensor- 3-AA batteries
• Weather Station- 5.0 Volt AC adapter and
3-AAA batteries (optional)
TX
°C/°F
1 2 3
AA
AA
AA
AA
AA
5.0V AC
Place sensors outdoors at least 6 feet above objects below them
(ground, roof, etc.)
• Thermo-hygro sensor-Place in a shaded location to protect from
sun.
• Multi-sensor- Place in an open area. No obstructions for 50 feet
in all directions.
Enjoy your backyard weather!
S85807
www.lacrossetechnology.com/S85807 Page | 2
