Page | 3
Page | 2
Note:
The quartz movement will keep the clock running
accurately. If the clock does not operate, or steadily loses
time, replace the battery.
POWER UP CLOCK
1. Remove the round Battery Cover to access the clock’s
Battery Compartment.
2. Install the included AA battery into the center Battery
Compartment according to the polarity markings.
3. Spin the Time Set Wheel to set your time.
Note:
For shipping purposes the battery is placed inside
the battery compartment with a plastic protection, please
remove it and install the battery correctly according to the
polarity markings.
Time Set
Wheel
Battery
Compartment
AA
SPECIFICATIONS
POWER UP LIGHTED DIAL
Remove the Lighted Dial Battery Covers and insert 4 - D
batteries (not included) into the Battery Compartments.
IMPORTANT:
Be sure all batteries are of the same voltage.
Light Sensor Switch
Set to ON to activate the Lighted Dial in
dark conditions. Set to OFF to deactivate
this function all together and conserve
batteries.
The Light Sensor is located on the front
of the clock between the six and seven.
The Light Timer will reset once the clock
is exposed to light. When it gets dark, the
Lighted Dial will stay on for 6 hours and
then automatically shut off.
ON/OFF Switch
OFF
ON
D
D
Battery Requirements:
Clock:
1 AA (IEC LR6) (included), required in movement to
operate the Time.
Lighted Dial:
4 D (IEC LR20) (not included)
Clock Battery Life:
1 Battery - 1 year
Dimensions:
21in. (53.4cm) Diameter / 3.07in. (7.8cm) Deep
MOUNTING
Use the mounting hole on the back of the clock to securely
mount it on a wall.
