I
NSTALLATION
Electrical connection
3. Install correctly your strain relief device to secure power cord. Insert the power cord through the strain
relief and tighten it.
The appliance is shipped without the strain relief device and without the cord.
4. Insert the strain relief device into the hole. Tight up the power cord and strain relief device with the
screw.
5.
Install the power cord: attach the wires to the terminal block as follows:
-
neutral (white wire) to N,
-
the L1 and L2 (red and black wire) to L1 and L2,
-
the ground to T (yellow / green).
NOTE: Make sure the wires are completely inserted into the terminals and secure connections are made.
6. Re-install the protection plate for the range or the cover for the cooktop.
7. Make sure that everything is properly secured.
R
EMINDER
: connections to main power supply preferably suppose to be hardwired into the wall Junction Box
compare using the Plugs and Outlet.
Fix the cable well below the hot air outlets, at the rear of the oven, never in front of them.
LA CORNUE
Installation Guide Château G4 - USA Canada
Page
51
U
S
A
&
C
ANADA
08NOTINSG4/ULC-1
Summary of Contents for Chateau 120
Page 73: ......
