Revised 3/27/20 Copyright © 2020 La Cornue Page 9
CARE & CLEANING:
Proper cleaning is necessary to maintain performance and appearance, while also ensuring safe operation. The
frequency of cleaning should be according to the type and amount of cooking. Best results will be achieved by
cleaning soiled components as soon as possible. Filters must be cleaned regularly. Using the aluminum knob,
lightly pull the filter toward the front of the Insert while pulling the backside downwards. Replacing the filter is just
as easy as taking it out.
The filters may be cleaned by hand washing in hot water using a mild detergent solution, or by placing them in a
dishwasher. Locate holes on the sides of the filter. Put filter in dishwasher with holes facing up so detergent can
enter filters. Dry the filters completely before using again. Rinse and dry with a soft lint-free cloth. Always wipe
stainless steel surfaces with the grain. Never wipe across the grain. After cleaning, reinstall the filters carefully.
>> Most common scrubber type pads will scratch the hood.
CAUTION:
If a commercially available stainless steel cleaner is used, it is important to read the labels for chlorine compounds.
Chlorine is a corrosive substance, DO NOT USE. Follow polish manufacturer’s instructions.
LED LIGHT BULBS:
La Cornue
Insert Series for Wood Hoods are designed for MR16/GU10 LED flood light bulbs. They can be
purchased at most home or grocery stores. The bulbs provided with the unit are 3.5 watt, 350 lumens, and 3000K
(warm white color temperature).
Explaining the Remote
The diagram to the left shows all functions of the
remote. Push the speed or light buttons once to turn
on; push the same button a second time to turn off.
You can use the “off” button to power off the lights
and blower simultaneously.
The “5 minute delay auto off” button can be pressed
when the blower is on at any speed. The blue light
behind the speed button will blink showing that this
feature has been activated. It will continue to blink for
5 minutes and then the blower will shut off
automatically. If you press the “5 minute delay auto
off” button again the blinking on the speed button
stops and the blower has returned to manual mode.
If you would like to mount the remote to any surface near your range, Velcro pieces have been provided. Peel and
stick one piece to back of remote, and the other to desired surface.
If battery in remote needs replacing, use a CR2025 watch battery. These are very common and easy to find. To
access, look to the bottom end of the remote; push release to the right, and slide battery tray out.
