English
English
Night time
Start
...............
End
...............
The enabled line is the one indicated by the flashing
arrow. Press key
to enter the time settings.
Press
to switch from one value to the next. Press
the
EXIT
key to quit the programming phase.
3.2.c - Night time programming
To enter the time the “night time” function begins and
ends, press the “PROG
PROG
” key until the following
message will appear on the display:
ESPRESSOTIME
Friday 15:36
Account
The enabled line is the one indicated by the flashing
arrow. Press
to enter the time settings. Press
to switch from one value to the next. Press the
EXIT
key to quit the programming phase.
3.3 - DATA INFO AND RESET
Place the key (1) on the sensor (2). The buzzer will ope-
rate indicating recognition. Meanwhile the name of the
utilized key (ACCOUNT) will appear on the display,
enabling the keyboard for the data info and reset phases.
3.3.a - Reading and reset of grand total and No. of
selections
To access the info phase, press the
n
°
key and the
following message will appear on the display:
Where the value under the Grand Total message
(478250) indicates the total takings since the last reset.
To reset the value, press RESET
RESET
and keep it
depressed until the following message appears:
ATTENTION:
The reset operation resets the grand total and
automatically resets the number of selections and
user totals.
To read how many times the key has been pressed since
the last reset for each selection, press the
n
°
key and
the following message will appear on the display:
Grand total
0
Reset NO
Grand total
478250
Reset NO
No. Of selections
Choose a selection
2
1
