IF YOU OWN A NON PREAMPLIFIED TURNTABLE (TRADITIONAL)
1 / Remove the five silicone pads which are located underneath the blotter: those are stick with
a double-sided adhesive.
2 / Clip the 5 shock absorbers in the groove of the pods provided for the purpose: there are 2
pods per shock absorber.
3 / Then place them in the grooves located on the loudspeaker.
4 / Put the blotter down on the shock absorbers and search for a “click” sound.
5 / Check if the blotter is in the right position on the shock absorbers.
34
6 / Swap to PHONO source by switching the button on the input panel.
7 / Plug your turntable’s audio signal cable into the RCA input. Connect your turntable’s ground
wire to the GROUND PIN. Then plug in your turntable to the power socket inside the trapdoor.
Do not forget to pass the cables through the hole designed for the purpose.
8 / Press the RCA / PHONO button on the control panel to select the source.
35
Summary of Contents for LX
Page 1: ...USER MANUAL LX...
