La Boite Concept LX PLATINE, Notice/User Manual

Page: 84 / 88

8 . W H A T T O D O ?
1 . TO CLEAN YOUR LX TURNTABLE
Before cleaning the device, unplug your LX from the power socket. Clean the device only with a dry cloth. Do
not use cleaning alcohol or solvents to clean the device’s surface because these could damage the painting
and cause electrical failures or fire if they penetrate the device’s electronics.
2 . NO POWER
Make sure that the AC cable is solidly connected. Make sure that the plug is fully inserted in the power socket
and there is power. Check that the master ON / OFF located underneath the loudspeaker
(please refer to
page 61) is positioned on “ON”. Make sure that the LX is not in standby mode. Make sure that the device
is switched on by checking the Bluetooth® white LED on the top panel. (cf p. 58)
84
3 . NO SOUND
Make sure that the volume is turned up to audible level and that the input source is at its maximum. Make
sure that an available input source is selected
(cf p. Using your LX with your devices) Make sure that the LX is
not in standby mode. Check if the bluetooth connection with your device is still active. Finally, if you still cannot
hear any sound coming out of the LX, increase the volume
(please refer to page 76)
4 . THE SOUND IS DISTORTED OR BUZZES
Check the connections of your music readers. Make sure that all the connecting cables are correctly plugged
in, especially the earth/protection shield connections. Make sure that your cables are in good condition.
5 . BACKGROUND NOISE AND UNDESIRABLE
INTERFERENCES
Separate the device from other electrical appliances which may be causing the interference. If the above
solutions do not remedy your problem, please contact a professional. Your home electrical installation may
be connected to earth ground or it may be polluted by electrical parasites devices that implies audible noise.
For any repairs during or after the warranty, please contact your dealer.