17
LIMITERS (OUTPUTS ONLY)
DLX 260
F1
F3
F2
Out1 Thresh
LIM 4.0dB
F1
•
F1: Threshold, -40dBu to 20dBu in 0.2dB steps
A high performance, low distortion limiter is provided on each output. Threshold is user adjustable;
all other parameters are carefully calculated dependant on configuration to provide clean and
effective control of signal dynamics. The front panel limit indicators show when the threshold is
reached. For system protection this module cannot be bypassed, but setting the threshold to its
maximum level will cause limiting only when it is absolutely necessary.
ROUTING (OUTPUTS ONLY)
DLX 260
F1
F3
F2
Out1 Source
Inp A
F1
•
F1: Output source, selectable; Input A, Input B or Sum A+B
In mono mode, this selects the source for a given output. In stereo mode, routing is preset to the
format shown above on page 12.
Summary of Contents for DLX200
Page 1: ...User Manual ...
