L3 Systems KeyAT-5 Manual Download Page 36

Page: 36 / 36

KeyAT-5 Keyboard Port Adapter

L3 Systems, Inc. PO Box 2954 Redmond, WA 98073
Tel: (425) 836-5438

http://www.l3sys.com

Use the KeyAT-5 to make an RS-232 connection to
a USB port on a target computer emulating both a
keyboard and mouse. Typical uses are:



Testing Software - Test software input from
simulated keystrokes and/or mouse.



Remote Access – Remote access to systems
where software does not provide other options.



Attaching input devices – Such as bar code
readers, scales, and credit card readers.

Some advanced KeyAT-5 Adapter features are:



Accepts ASCII and Scan Codes

- Accepts printable and

encoded ASCII characters and maps to the correct key.

Also you can send keyboard scan codes



Simple Mouse Control – Mouse movements
and clicks are done with simple commands.



Programmable Keys – You can load a table in
non-volatile flash memory assigning a key or
keys to specific ASCII characters.



Flexible Serial Parameters – You can load the
baud rate and parity settings in non-volatile
flash memory.

Summary of Contents for KeyAT-5




































Search results

Summary of Contents for KeyAT-5

Reviews:

Related manuals for KeyAT-5

Brands by name

Popular brands

L3 Systems KeyAT-5, Manual

Search results

Summary of Contents for KeyAT-5

Reviews:

Related manuals for KeyAT-5

Brands by name

Popular brands