Flashback Version
TB-100 Bluetooth Transmitter Installation Guide
P a g e 2
L3 Mobile-Vision
10.29.2018
Flashback Version
Mount the transmitter box
Begin by selecting a location that is:
On a flat surface in the trunk or cabin
Within 4 feet of the antenna and 10 feet of the Flashback DVR, and
Away from possible spills.
Next, mount the transmitter box (ZAS-T
M010001) to the surface using the self-tapping screws.
Mount the antenna
Begin by selecting a location that is within 4 feet of the Bluetooth Transmitter, such as on
the vehicle’s back deck, cage wall, or A-pillar. Next, mount the antenna (ZAN-001-0001)
using the provided bracket hardware (ZMC-TM010002).
Connect the antenna cable (ZCA-C22021-6) to the antenna (ZAN-001-0001).
Connect the other end of the antenna cable (ZCA-C22021-6) to the Bluetooth
Transmitter.
Plug the Signal & Power cable (ZCA-TM010001) into the POWER/SIGNAL port on the
back of the Bluetooth Transmitter
.
Make the wiring connections
:
Wire
Color
Connect to…
FB REC LED
Orange
Orange wire on Flashback Pigtail cable
GROUND
Black
Same ground location as Flashback
12V BATTERY
Red
To 2-amp fuse, then to battery positive
IGNITION
White
To 2-amp fuse, then to white wire on Flashback
Pigtail cable
TRIGGER OUT
Gray
To the brown Aux 1 wire or gray Aux 2 wire
Connect the Flashback Pigtail cable (ZCA-TM010002) to the white lead on the back of
the Flashback monitor cable
.
1
2
3
4
5
7
6
