MPM-1000A Operator Manual
1000-7075 Rev D
6-23
Figure 6-28 Calibration File Screen
e. Select the desired file to load. Files can contain data for all gain components of
the system (BUC, PA, antenna) or a subset of these. In the event that the file
only characterizes a subset of the gain components, only these sections of the
Gain tab will be filled in.
f. Click
Open
and a
File Validation Successful!
Message pops up. (See Figure
g. Click
OK
. Files will load in the appropriate field selected. If all parameters type of
file was selected, then all fields will have a file listed.
Figure 6-29 File Validation Success
h. Select the
Losses
tab and the
Losses
screen will open.