MPM-1000A Operator Manual
1000-7075 Rev D
6-12
a. Connect PC and Master Modem to a network switch (not provided).
b. Turn on the PC and the Modem.
c. Once the Modem Status LED has turned green, open the HCI program.
6.4.2 Set the Mode of the Modem
a. Set the Modem to Maintenance Mode, if in Maintenance Mode skip to Section
6.4.3.
b. Select
Configure → Mode
. (See Figure 6-11)
Figure 6-11 Configure File Menu
c. Select
Maintenance
and then click
OK
. (See Figure 6-12)
Figure 6-12 Select Mode Screen
d. The Modem will change modes. Wait until the new mode has completed
initializing to proceed.
6.4.3 Set the CDU and Data Ports
This will set the CDU and Data Ports to a desired network configuration.
