MPM-1000A Operator Manual
1000-7075 Rev E
5-6
Figure 5-10 SCPC Main Screen
To exit the HCI, select
File
Exit
or click on the X at the upper right hand side of the
window. You will be asked to confirm the operation.
NOTE
Exit stops the HCI application only. The Modem will continue to run.
5.6 File Pull-Down Menu
An enhanced File pull-down menu is available while in Maintenance Mode. The
enhancements to this pull-down menu are:
Save Config, Save Config As
, and
Restore Config
. (See Figure 5-11) During any other Mode, only the
Exit
menu option is
available.
a. Select
File
to open the drop-down menu.
b. Select
appropriate command you wish to complete.
Refer to Table 5-1 File Configuration for data descriptions for this window.
Figure 5-11 File Menu in Maintenance Mode
