MPM-1000A Operator Manual
1000-7075 Rev E
4-9
2) Select
Maintenance
and then click
OK
. (See Figure 4-10)
Figure 4-10 Select Mode Screen
3) Wait until the Modem has completed initializing Maintenance Mode (a pop-up
screen will say “Terminal Initializing…) Wait to proceed with step 4.
4) From the Menu bar, select
Software
→
Do Rollover
to display the
Software Download
window. (See Figure 4-11)
Figure 4-11 Software Menu
5) On the S
oftware Download
screen, click the
File
button
and browse to the
new version that was placed on the C: drive in step a. (See Figure 4-12)
NOTE
The software download screen shown is when the Modem is in a
multiple Modem configuration. For more information on multiple
modem configuration, refer to Section 6.4.