manualshive.com logo in svg

L3 Communications GH-3100, Pilot'S Manual

Share
Download
L3 Communications GH-3100 Pilot'S Manual Download Page 4

 Pilot’s Guide  

ii

GH-3100

Introduction ............................................................................. i

Table of Contents .................................................................. ii

Purpose .................................................................................. 1

Equipment Description ......................................................... 2

Screen Features

Menu Access .......................................................................... 5

Barometric Setting ................................................................ 8

Attitude Information .............................................................. 9

Air Data Information .............................................................11

Navigational Information .................................................... 13

Heading Information ............................................................ 16

Start-Up and Self Test

Power ON Self Test Mode ................................................... 17

Identification Mode

 .............................................................. 17

Sensor Alignment Mode ..................................................... 20

Normal Operating Mode (Invalidity Indications) ............... 21

Troubleshooting .................................................................. 26

Specifications

 ...................................................................... 28

Notes..................................................................................... 30

Pilot’s Guide for the GH-3100

Electronic Standby Instrument System

(Software Version 1.x & 3.x)

Part No. 501-1860-xxx1 & 501-1860-xxx3

© Copyright 2003, 2007, 2009

L-3 Avionics Systems, Inc.

5353 52nd Street, S.E.

Grand Rapids, MI USA 49512-9704

Customer Support  (800) 453-0288  

International (616) 949-6600  

FAX (616) 977-6898

www.as.l-3com.com

Table of Contents

Table of Contents

Summary of Contents for GH-3100





































Reviews:

No comments

Brands by name

Popular brands

Load more brands