Page 27
X-50 User Manual
Power Cable
Connect the power cable to the X-50 connector labeled
Power
Power
Power
Power
, and to any 12 volt DC power source. Operation of
the X-50 will be the same as described in the section
AC/DC Power Adapter
.
The power supply must be capable of supplying at
least 500ma.
The supply voltage should be nominal 12VDC,
however, it can range from 8-16VDC without causing
harm to the camera.
Video Cable
Connect one end of the video cable to the X-50 connector
labeled
Video
Video
Video
Video
, and the other end to a video monitor.
When the video cable is connected to the camera, the
video automatically switches from the internal LCD
display to the external video monitor. When disconnected,
the video switches back to the camera’s LCD display.
The X-50 may require 3-4 seconds for the video to
stabilize when switching between an external video
monitor and the internal LCD display.
The X-50 camera cannot simultaneously display
external video and the internal LCD display.
Summary of Contents for Thermal-Eye X-50
Page 1: ...User Manual ...
