<Z-Plug Spreader Hopper Attachment:
The Z-Plug unit has the ability to mount a 120
lb Hopper Spreader unit to the frame. Just like our Z-Spray spreader systems,
maintenance is a key requirement to allow successful applications. Here are a few things
to maintain on this system.
Lubricate (Silicone Spray) Hopper and Diffuser cables on a daily basis.
Clean debris and product from Hopper daily to eliminate build up.
Keep hydraulic hose fittings tight and free of leaks.
<Z-Plug Slice Seeder Attachment:
The Z-Plug unit has the ability to mount a 36”
Gandy Slice Seeder to the frame. Giving the Slice Seeder the proper maintenance will
allow this attachment to operate successfully.
Clean and remove all products from the seeder box after each application
Grease Pillow Block bearings & Drive Chain weekly.
Lubricate adjustment handle weekly.
Check hardware weekly (tighten if needed).
Check that knives are free of chips, crack and bends before each use.
< Z-Plug De-thatch Rake Attachment:
The Z-Plug unit has the ability to mount a 46”
De-thatch Rake to the frame. Giving the De-thatch Rake the proper maintenance will
allow this attachment to operate successfully.
Check to ensure that rakes are not bent, twisted or broke before each use.
Ensure that all collars are tight and adjusted properly.
< Z-Plug Snow Plow/Blade Attachment:
The Z-Plug unit has the ability to mount a 52”
Snow Plow/Blade to the frame. Giving the Snow Plow/Blade the proper maintenance will
allow this attachment to operate successfully.
Keep angle pivot greased and clear of debris.
Check spring eye bolt nuts from coming loose.
Ensure that pivot bolt and nut remain snug.
Check scrape bar nuts and bolts and keep tight.
Check scrape bar from time to time for wear, replace when needed.
< Z-Plug Spiker Attachment:
The Z-Plug unit has the ability to mount a 40” Spiker to
the frame. Giving the 40” Spiker the proper maintenance will allow this attachment to
operate successfully.
Grease Pillow Block Bearings on a weekly basis
Check hardware weekly (tighten if needed)
Clean and remove any debris buildup between spikes
Ensure that outer chains are not bound up or twisted
Page 8
Summary of Contents for Z-Plug
Page 1: ...OWNERS MANUAL Z Plug 4 wheel unit ...
Page 2: ......
