15
constantly, press and hold the IR button for 3 seconds. Repeat to switch back to auto icon overlay (only visible for
10 sec. max following the use of a button).
•
USING THE DIGITAL ZOOM
Press the “+” button (B) to zoom in. Press the “-” button (B) to zoom out. Hold the button down to zoom in/out
rapidly. The Digital Zoom icon at the lower left corner of the display will indicate the magnification factor, from 1.0x
to
5.0x
(in 0.1x increments).
•
SELECTING PAL OR NTSC VIDEO OUTPUT
The Video Output jack (G) is set to NTSC format (30fps TV standard in the USA, Canada, Mexico, etc.) by default.
To select PAL video output (25fps) format as used in other countries,
Connect the unit to your video device first.
Hold both the IR button (C) and Image Brightness (E) buttons down for 5 seconds while viewing the display
through the eyepiece.
When the display changes to “PAL”, release the buttons.
To switch back to NTSC video output format, hold both buttons for 5 seconds until the display indicates “NTSC”,
then release the buttons.
TECHNICAL INSPECTION
It is recommended that you inspect the sight before every use. Make sure to check for the following:
Visually inspect that the unit is free from any physical damage; cracks, dents or signs of corrosion which may
Note: The“Auto Off” feature is disabled when using the Video Output jack.
