4 of 4
6/27/17
Pntd Frmhs Storage Console
STEP 6
Position Bottom Panel (E) between the Left and
Right Ends. Align the Groove in the Bottom with
the Back Panel. Attach bottom panel to Vertical
Dividers (H) using 4 M6 * 30MM Bolts (J) and to
the Right and Left End Panels (B) and (C) with 4
M6 * 35MM Bolts (I). Use Wrench (L) to install
and tighten all bolts.
At this point tighten all assembly
bolts.
STEP 6
Position assembled case upright. Insert 12 Shelf
Supports (K) in to predrilliled holes in the Left,
Center and Right hand openings in Console. Place
Shelves (F) on the Shelf Supports in the Left and
Right sides of Console. Place Shelf (G) on the
Shelf Supports in center of Console. Make sure the
Shelves are seated down firmly on the Shelf
Supports.
CARE: Clean with mild soap and wipe dry.
www.llbean.com
Product Support 1 800 341 4341