3 of 4
6/27/17
Pndt Frmhs Cabinet
STEP 3
Lay Top Panel (A) upside down on non-abrasive
surface. Attach Left Side Panel (B) to Top Panel
(A) using 2 M6 * 35MM Bolts (I). Use Wrench
(Q) to install Bolts.
Position Back Panel (D) in to grooves on Left Side
Panel (B) and in Back Rail on Top (A).
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 4
Align groove in Right Side Panel (C) with Back
Panel. Attach Right Side Panel (C) to top panel (A)
using 2 M6 * 35MM Bolts (I). Use Wrench (Q) to
install Bolts.
Do not over tighten Bolts at this
time. Assemble Loose.
STEP 5
Position Bottom Panel (E) between the Left and
Right Ends. Align the Groove in the Bottom with
the Back Panel. Attach bottom panel (E) to Right
and Left End Panels (B) and (C) with 4 M6 *
35MM Bolts (I). Use Wrench (Q) to install Bolts.
Do not over tighten Bolts at this
time. Assemble Loose.
