STEP 1
Read through these instructions
thoroughly. We have found this to be of
great value when first assembling this
product.
STEP 2
Remove all parts and hardware from
packing material. Place wooden parts on
non-abrasive surface (like carpet or
carton) to prevent damage to finish.
Identify all parts using diagram at right.
STEP 3
Identify and count hardware using
diagram at right.
Assembly of this product requires a
Phillips screwdriver and a hammer. We
have found it helpful to have a second
person assist with assembly.
Note: we have included an Allen
Wrench to aid in tightening the Joint
Connectors.
STEP 4
Attach the Front Leg Assembly (B) to
the Seat Assembly(A) using two 1/4" x
20 x 2" Joint Connectors, two 1/4"
washers and two lock nuts for each side.
Ensure that the cross bar of the front leg
assembly (A) faces the front of the chair
as shown. Insert the Joint Connector
through the Front Leg Assembly (B) and
into the Seat Assembly (A). Place
washer on end of Joint Connector and
finish with lock nut. Repeat for other
side.
Note: Do NOT tighten joint
connectors completely
.