background image

Attention

The Oval 80 heater has been 
designed, tested, and evaluated 
by the L. B. White Company as a 
radiant tube heater according to 
the requirements of standard IAS 
U.S. Requirements 8-94. Speci

fi

 c 

Sentinel radiant tube heaters have 
been tested and evaluated by the 
CSA Group in accordance with the 
requirements of standard IAS u.S. 
Requirements 8-94 and are listed 
and approved by the CSA Group 
as a direct gas-

fi

 red radiant tube 

heaters. All heaters are designed 
speci

fi

 cally for the intended use 

of heating poultry con

fi

 nement 

buildings. 

CHECK WITH YOUR 

LOCAL FIRE SAFETY AU-
THORITY, YOUR LOCAL FUEL 
GAS SUPPLIER, OR THE L.B. 
WHITE COMPANY IF YOU 
HAVE QUESTIONS REGARD-
ING APPLICATIONS.

www.lbwhite.com

SCAN THIS

with your smartphone or
visit http://goo.gl/yyKxJo to 
view maintenance videos 
for L.B.White heaters.

WORLD PROVIDER - INNOVATIVE HEATING SOLUTIONS

411 Mason Street, Onalaska, WI 54650  •  800-345-7200  •  608-783-5691  •  608-783-6115 (fax)  •  www.lbwhite.com

Congratulations!

You have purchased the 

fi

 nest radiant tube heater available for 

the heating of poultry con

fi

 nement buildings.

Your new L.B. White radiant heater incorporates the bene

fi

 ts 

from the most experienced manufacturer of heating products 
using state-of-the-art technology.

We, at L.B. White, thank you for your con

fi

 dence in our products 

and welcome any suggestions or comments you may have...call 
us toll free at (800) 345-7200.

Propane Vapor Withdrawal 
or Natural Gas

(1) Listed under U.S. Patent #: 9,303,880

Oval 80 

v.2

Sentinel 

v.2

Radiant Tube Heaters

  AR80 (1)
*AT 100
*AT 125
*AT 150

80,000 Btuh
100,000 Btuh
125,000 Btuh
150,000 Btuh

Owner’s Manual and Instructions

View this manual online at www.lbwhite.com

*  Requires an app like QR Droid

for Android or for iPhone

SEE ASSEMBLY

INSTRUCTIONS

INSIDE

Please refer to important

elevation information on 

inside cover.

*Some models 

CSA-US approved. 

See speci

fi

 cations page.

Summary of Contents for Oval 80 v.2










































































Reviews: