background image

Attention

This heater has been tested 
and evaluated by L.B. White 

Co. as a direct gas-fired

radiant heater designed 

specifically for use in farrowing 
operations in swine
confinement buildings. If you 

are considering using this 

product for any application

other than its intended use, 

then please contact your fuel 

gas supplier, or the

L.B. White Company, LLC.

www.lbwhite.com

SCAN THIS

with your smartphone or

visit http://goo.gl/uqadY to  

view maintenance videos 

 

for L.B.White brood heaters.

WORLD PROVIDER - INNOVATIVE HEATING SOLUTIONS

411 Mason Street, Onalaska, WI 54650  •  001-608-783-5691  •  608-783-6115 (fax)  •  www.lbwhite.com

Congratulations!

You have purchased the finest radiant heater available for the heating 
of livestock in agricultural animal confinement buildings.

Your new L.B. White radiant heater incorporates the benefits from the 
most experienced manufacturer of heating products using state-of-the-

art technology. 

We, at L.B. White, thank you for your confidence in our products and 
welcome any suggestions or comments you may have...call us toll free 
at (800) 345-7200. 

Propane Vapor or Natural Gas

I-3

Agricultural Building 

Radiant Brood Heaters

I-3

2,800 Btuh

Owner’s Manual and Instructions

View this manual online at www.lbwhite.com

*  Requires an app like QR Droid 

for Android or for iPhone

SEE ASSEMBLY

INSTRUCTIONS

INSIDE

Please refer to important 

elevation information on  

inside cover.

Summary of Contents for I-3

























































Reviews: