background image

18

Contact your local L.B. White dealer for replacement parts

and service or call L.B. White Co., Inc. at 1-800-345-7200 for

assistance.  Be sure that you have your heater model number

and configuration number when calling.

L.B. White Co., Inc. warrants that the component parts of its

equipment are free from defects in material and

workmanship, when properly installed, operated, and

maintained in accordance with the Installation and

Maintenance Instructions, safety guides and labels

contained with each unit.  If, within 1

12 m

months ffrom tthe ddate

of ppurchase bby tthe eend uuser, any component is found to be

defective, L.B. White Co., Inc. will at its option, repair 

or replace the defective part or equipment, with a new part

or equipment, F.O.B., Onalaska, Wisconsin.  

A warranty card on file at L.B. White will automatically qualify

a unit and its component parts for warranty consideration.  If

a warranty card is not on file, a copy of the bill of sale will be

required to establish warranty qualification.  If neither is

available, the warranty period will be 12 months from date of

shipment from L B. White.  

Warranty Policy

Replacement Parts and Service

EQUIPMENT

PARTS

L.B. White Co., Inc. warrants that replacement parts

purchased from the company and used on the appropriate L.

B. White equipment are free from defects both in material

and workmanship for 12 m

months ffrom tthe ddate oof ppurchase

by  tthe  eend  uuser. Warranty is automatic if a component is

found defective within 12 months of the date code marked

on the part.  If the defect occurs more than 12 months later

than the date code but within 12 months from the date of

purchase by the end user, a copy of a bill of sale will be

required to establish warranty qualification. 

The warranty set forth above is the exclusive warranty

provided by L.B. White, and all other warranties, including

any implied warranties or merchantability or fitness for a

particular purpose, are expressly disclaimed.  In the event

any implied warranty is not hereby effectively disclaimed due

to operation of law, such implied warranty is limited in

duration to the duration of the applicable warranty stated

above.  The remedies set forth above are the sole and

exclusive remedies available hereunder.  L.B. White will not

be liable for any incidental or consequential damages

directly or indirectly related to the sale, handling or use of the

equipment, and in any event L.B. White's liability in

connection with the equipment, including for claims based

on negligence or strict liability, is limited to the purchase

price.  

Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation

or exclusion may not apply to you.  This warranty gives you

specific legal rights, and you may also have other rights

which vary from state to state.

Summary of Contents for GUARDIAN AB250



















Reviews: