background image

16

Contact your local L.B. White dealer for replacement parts

and service or call L.B. White Co., Inc. at 1-800-345-7200 for

assistance.  Be sure that you have your heater model number

and configuration number when calling.

L.B. White Co., Inc. warrants that the component parts of its

heater are free from defects in material and workmanship,

when properly installed, operated, and maintained in

accordance with the Installation and Maintenance

Instructions, safety guides and labels contained with each

unit.  If, within 1

12 m

months ffrom tthe ddate oof ppurchase bby tthe

end  uuser, any component is found to be defective, 

L.B. White Co., Inc. will at its option, repair 

or replace the defective part or heater, with a new part or

heater, F.O.B., Onalaska, Wisconsin.  

A warranty card on file at L.B. White will automatically qualify

a unit and its component parts for warranty consideration.  If

a warranty card is not on file, a copy of the bill of sale will be

required to establish warranty qualification.  If neither is

available, the warranty period will be 12 months from date of

shipment from L B. White.  

Warranty Policy

Replacement Parts and Service

EQUIPMENT

PARTS

L.B. White Co., Inc. warrants that replacement parts

purchased from the company and used on the appropriate L.

B. White heater are free from defects both in material and

workmanship for 12  m

months  ffrom  tthe  ddate  oof  ppurchase  bby

the eend uuser. Warranty is automatic if a component is found

defective within 12 months of the date code marked on the

part.  If the defect occurs more than 12 months later than

the date code but within 12 months from the date of

purchase by the end user, a copy of a bill of sale will be

required to establish warranty qualification. 

The warranty set forth above is the exclusive warranty

provided by L.B. White, and all other warranties, including

any implied warranties or merchantability or fitness for a

particular purpose, are expressly disclaimed.  In the event

any implied warranty is not hereby effectively disclaimed due

to operation of law, such implied warranty is limited in

duration to the duration of the applicable warranty stated

above.  The remedies set forth above are the sole and

exclusive remedies available hereunder.  L.B. White will not

be liable for any incidental or consequential damages

directly or indirectly related to the sale, handling or use of the

heater, and in any event L.B. White's liability in connection

with the heater, including for claims based on negligence or

strict liability, is limited to the purchase price.  

Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation

or exclusion may not apply to you.  This warranty gives you

specific legal rights, and you may also have other rights

which vary from state to state.

Summary of Contents for 377

















Reviews: