L-Acoustics X8, Rigging Manual

Page: 19 / 57

Rigging procedures
19 X8 rigging manual (EN) version 1.0
Assembly
About this task
With the short U-bracket in horizontal position, the enclosure applies a diagonal force of 179 dekanewtons on the
anchoring points.
Apply the appropriate safety factor.
Procedure
1. Drive the knobs in the inserts on the enclosure.
Stop when the threading is halfway in.
2.
Secure the U-bracket to the wall using M10 screws.
When securing the U-bracket horizontally, make sure the hooks are oriented upwards.
3. Lift the enclosure by the knobs and place it inside the U-bracket.
Adjust the knobs on both sides so that the safety washer is between the hook and the enclosure.