background image

Mechanical safety

Mechanical safety

Flown congurations

The KS28 rigging system complies with 2006/42/EC: Machinery Directive. It has been designed following the

guidelines of BGV-C1.
2006/42/EC: Machinery Directive species a safety factor of 4 against the rupture. The own deployments described in

this manual achieve a safety factor of 

5 or higher

.

Refer to Soundvision for the safety factor of a specic deployment.
The 

safe limit

 gives the maximum number of elements for which the safety factor is always compliant with the

2006/42/EC: Machinery Directive, regardless of the other deployment parameters (site angles, inter-enclosure angles,

etc.)
The 

maximum limit

 gives the maximum number of elements for which the safety factor can be compliant with the

2006/42/EC: Machinery Directive, when the other deployment parameters provide the best mechanical conditions.

Conguration

Rigging accessory

Maximum / Safe limit

Flown

KS28-BUMP

16

Other congurations

For other congurations, respect the recommended maximum limit for optimal stability.

Conguration

Rigging accessory

Maximum limit

Ground-stacked

No rigging accessory

4

Stacked upright

No rigging accessory

2

Stacked on chariot

KS28-CHARIOT

4

Mechanical safety of the rigging system

Before any installation, always model the system in Soundvision and check the 

Mechanical Data

 section for

any stress warning or stability warning.

KS28 rigging manual (EN) version 2.0

 8

Summary of Contents for KS28
































Reviews: