L-Acoustics arcs focus Rigging Manual Download

Page: 4 / 37

ARCS

WIDE SYSTEM / ARCS

FOCUS SYSTEM

rigging manual

VERSION 3.0

ARCSWIFO_RM_EN_3.0

w w w . l - a c o u s t i c s . c o m

RIGGING SYSTEM COMPONENTS

The system approach developed by L-ACOUSTICS

consists in providing packaged solutions for loudspeaker system in

order to guarantee the highest and most predictable level of performance at any step: modeling, installation, and

operation. An L-ACOUSTICS

loudspeaker system is the set of components available to form any loudspeaker system

based on one of the full-range loudspeaker enclosure afforded by L-ACOUSTICS

®.

It includes enclosures, rigging

accessories, loudspeaker cables, amplified controllers, and software applications.
The main components involved in the rigging process of an

ARCS

WIDE SYSTEM

ARCS

FOCUS SYSTEM

are

the following:

1.1

Loudspeaker enclosures

ARCS

WIDE

Full range enclosure, arrayable in a constant curvature line,

provided with 2 WIFORIG coupling bars.

ARCS

FOCUS

Full range enclosure, arrayable in a constant curvature line,

provided with 2 WIFORIG coupling bars.

SB18m

Subwoofer enclosure
provided with 2 SB18MRIG coupling bars.

1.2

Rigging elements

WIFOBUMP

Frame for flying ARCS

WIDE/FOCUS or SB18m enclosures as a vertical array.

Provided with two bow shackles WLL 1 t.

WIFORIG

Coupling bars dedicated to ARCS

WIDE and ARCS

FOCUS.

Equipped with the LOCKTAB locking tab.
Delivered with the enclosures.

SB18MRIG

Coupling bars dedicated to SB18m.
Equipped with the LOCKTAB locking tab.

Delivered with the enclosure.

WIFOLIFT

Bar for flying two, four, six or eight ARCS

WIDE/FOCUS enclosures as a horizontal array.

Provided with one bow shackle WLL 1 t and one connecting rod.

WIFOLIFTBAR

Bar for flying three, five or six ARCS

WIDE/FOCUS enclosures as a horizontal array.

Provided with one bow shackle WLL 1 t.

WIFOSOCK

Pole mount socket for an ARCS

WIDE/FOCUS enclosure.

CLAMP250

Truss clamp.

WIFOTILT

Rigging accessory for stacking and tilting up to 4 ARCS WIFO on SB18m.

1.3

Software application

SOUNDVISION Proprietary 3D acoustical and mechanical modeling software.

Mechanical safety

Before any installation, model the system in SOUNDVISION and check the

Mechanical Data

section for any

stress warnings

Other ARCS

WIDE/FOCUS SYSTEM components

All the other components of the system are presented in the

ARCS

WIDE/FOCUS SYSTEM user

manual

, document in which the loudspeaker configurations and connection are described.

Summary of Contents for arcs focus






































Search results

Summary of Contents for arcs focus

Reviews:

Related manuals for arcs focus

Brands by name

Popular brands

L-Acoustics arcs focus, Rigging Manual

Search results

Summary of Contents for arcs focus

Reviews:

Related manuals for arcs focus

Brands by name

Popular brands