L-Acoustics A15 Focus Owner'S Manual Download Page 49

Page: 49 / 98

Rigging procedures

Rigging procedures

Flying

Flying a vertical array with A15-BUMP/A15-RIGBAR

Type of deployment

own array
A15-BUMP/A15-RIGBAR

Rigging accessory

2 x Ø12 mm shackle WLL 1 t (provided)
M-BAR (optional, with A15-BUMP)

Min number of operators

Risk of falling objects

Verify that no unattached items remain on the product or assembly.

Secondary safety

Use available holes on the rigging accessories to implement a secondary safety.

Array orientation

Under A15-BUMP and A15-RIGBAR, the enclosure HF section can be oriented both ways.
Under KS21, the HF section is on the same side as the subwoofer vent.

A15 Wide/Focus array

Procedure

Stack up to three enclosures.
Connect each enclosure on both sides before adding the new one.

SHLAK!

A15 owner's manual (EN) version 1.2

Summary of Contents for A15 Focus



































































































Search results

Summary of Contents for A15 Focus

Reviews:

Related manuals for A15 Focus

Brands by name

Popular brands

L-Acoustics A15 Focus, Owner'S Manual

Search results

Summary of Contents for A15 Focus

Reviews:

Related manuals for A15 Focus

Brands by name

Popular brands