background image

L-ACOUSTICS XT Manual V1.1 

2/11/2003 

1

  

 

FOREWORD

 

Thank you for purchasing the 112XT or 115XT sound reinforcement system.  
This manual is intended to provide you with the information you require to install and operate your 

XT loudspeaker enclosure in a wide variety of professional sound reinforcement applications. 
Specific information and recommendations are included regarding system design, sound design and 

installation. We are confident that the information provided in this manual will be sufficient for most 

applications, however, should you require further assistance your distributor or L-ACOUSTICS

®

 are 

available to provide additional technical support. 

MANUAL ORGANIZATION 

The Introduction gives a brief presentation of coaxial technology and the XT system. 

Chapter 1 introduces the 112XT and 115XT loudspeaker enclosures plus accessories 

Chapter 2 discusses 112XT and 115XT power amplification and cabling 

Chapter 3 describes preset selection and system operation 

Chapter 4 discusses sound design aspects 

Chapter 5 describes 112XT or 115XT installation procedures 

Chapter 6 discusses XT system operation and maintenance procedures 

Chapter 7 gives 112XT and 115XT specifications 

 
 
 
 
 
 

Summary of Contents for 112XT




















































Reviews: