1.
On clean, dry skin apply your preferred serum or cream to the area you want
to treat. You can use any skincare product that has Aqua listed as one of the
ingredients.
2.
Remove the protective cover from the treatment head, press and hold the on/off
button until device turns on.
3.
Select your preferred mode by pressing the on/off button, you will see the LED
lights change colour as you go through the modes.
4.
Hold your hand in contact with the conduction strip on the handle, and when
the Ionic strip on the treatment head is in contact with your skin you will feel
the vibration of deep tissue massage.
5.
Use steady upward motions starting from the base of the neck, upwards over
the jaw line and on to the lower cheek. Repeat this motion approximately 5
times in each position across the whole neck area.
6.
To lift the cheeks, start at the jaw line and use upward lifting motions to the top
of the cheek bone. Repeat this motion approximate 5 times in each position.
7.
To lift the eye area and forehead use upward motions starting just below the eye
brow, but not over the eye lid and use steady upward motions to the hair line.
8.
At the top of each upward motion, lift the device away from the skin, then start
again at the base position , do not pull back downwards.
Regime
