Targa Systems Division
S4 Ethernet NAS DTS Installation Guide
32003272-1 Rev 5
rdate Host
Used to set Targa DTU “UTC” time from a remote host
If set non-zero and a valid IP address, the Targa DTU at power-up will
issue the TCP/IP command to retrieve the date and time from the
specified host on the network and set the local DTU system time. If
there is no host response an error message is sent to the console
(COM 1).
Refer to RFC 868 for details.
Targa S4 NAS DTU does not provide a time zone offset from UTC
syslog host
Used to log Targa DTU console status messages to a remote host on
the network. If set non-zero and a valid IP address, all Targa DTU log
messages as are sent to the specified “syslog” host.
SYSLOG protocol and message format per:
http://tools.ietf.org/html/rfc5424
21
