L-3 Communications Office STE, User Manual

Page: 175 / 312

STE User’s Manual Crypto Card Management
Rel. 2.6 6-19
Figure 6-49. SDNS Key Data/Key State Menu
XXXXXXXX = Key state of SDNS KKKKKK in line 1 may be NO KEY, INVALID KEY, KEY OK, KEY
EXPIRED, REKEY ERROR, REKEY PENDING, CIM CKL ERROR, SEED KEY, KMS KEY, or
UNKNOWN KEY
Press: Result:
NEXT
Advances display to next SDNS N KEY DATA/KEY ID: ( Figure 6-40 ) or
Advances display to STU-III KEY DATA/KEY ID: ( Figure 6-34 ) if present SDNS key
set is last set on the User Card.
SCROLL Advances display to next SDNS N KEY DATA/KEY ID: ( Figure 6-40 )
BACK Returns display to VIEW CARD KEY DATA (Paragraph 6-3 )
Press NEXT to advance to the first display for the next SDNS key set installed on the User Card
inserted in the STE.
Press
SCROLL to return to the first display for the current SDNS key set installed on the User
Card inserted in the STE.
Press
BACK if all SDNS key sets have been reviewed and STU-III key does not need to be
reviewed.
6-4. ZEROIZE KEY
When card privileges are enabled, you may access the ZEROIZE KEY menu ( Figure 6-50 ) to remove
specific keys from the STE/Crypto Card. If card privileges are not enabled this menu will not be
presented to you.
NOTE
You can only zeroize a User Card that is associated with a specific STE: an
unassociated card cannot be zeroized by any unassociated STE.
1. The ZEROIZE KEY menu ( Figure 6-50 ) is accessed from the VIEW CARD KEY DATA menu by
pressing SCROLL if card privileges are enabled, or if the STE is in idle condition by pressing
MENU , SCROLL , SELECT , USER , SCROLL , and SCROLL .
Figure 6-50. Zeroize Key Menu
Press: Result:
SELECT Advances display to ZEROIZE SPECIFIC KEY ( Figure 6-51 )
SCROLL Advances display to REMOVE TERMINAL/CARD ASSOCIATION (Paragraph 6-5 )
BACK Returns display to CRYPTO CARD MANAGEMENT
SDNS n KEY DATA
KEY STATE: XXXXXXXXXXXXX
SCROLL BACK NEXT
ZEROIZE KEY
SELECT SCROLL BACK