L-3 Communications Office STE, User Manual

Page: 124 / 312

TPA Functions STE User’s Manual
4-32 Rel. 2.6
Press: Result:
ALL Advances display to REMOVE ALL ACL ELEMENTS ( CONFIRM) menu
(Paragraph 4-5.2.2.1.2.3 )
BACK Returns display to EDIT ACCESS CONTROL LIST menu (Paragraph 4-5.2.2.1 )
Press DAO , KMID or ALL to access the appropriate list.
4-5.2.2.1.2.1 Remove DAO Code
Entering the DAO Code for removal uses the same procedures as addressed in Paragraph 4-5.2.2.1.1.1 .
If the entered DAO is not found, the STE will present a notification in the display. When the DAO Code to
be removed is entered in the menus (Add DAO Code displays A – E), the Confirmation menu (
Figure
4-56 ) is presented.
Figure 4-56. Remove DAO Code Confirmation Menu
Press: Result:
CONFIRM Advances display to DAO REMOVED menu ( Figure 4-57 )
ABORT Returns display to REMOVE ACL ELEMENTS menu
(Paragraph
4-5.2.2.1.2 )
Press CONFIRM .
When confirmed the DAO is removed the STE presents the DAO Code Removed menu ( Figure 4-57 ).
Figure 4-57. DAO Code Removed Menu
Press: Result:
CONTINUE Completes the removal of the DAO and returns display to REMOVE ACL ELEMENTS
menu (Paragraph
4-5.2.2.1.2 )
Press CONTINUE .
4-5.2.2.1.2.2 Remove KMID Code
KMIDs can be removed by entering its 15-digit code in the Enter KMID menu ( Figure 4-58 ) using the
DIAL PAD KEYS . Upon entry, the STE will search for the entered code.
REMOVE DAO CODE
ABORT CONFIRM
12R456
DAO REMOVED
CONTINUE