L-3 Communications CEU, User Manual

Page: 134 / 312

User Functions STE User’s Manual
5-2 Rel. 2.6
Figure 5-2. Network Settings Menu
Press: Result:
SELECT
Advances display to ACTIVE NETWORK PORT: menu ( Chapter 2 )
SCROLL
Advances display to TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE
UPDATE MANAGEMENT menu (
Figure 5-3 )
BACK Returns display to TERMINAL MANAGEMENT menu ( Figure 5-1 )
Press SCROLL .
When SCROLL is pressed in the NETWORK SETTINGS MENU, the TERMINAL PRIVILEGES,
ASSOCIATIONS, AND SOFTWARE UPDATE MANAGEMENT menu ( Figure 5-3 ) is presented.
Figure 5-3. Terminal Privileges, Association and Software Update Management Menu
Press: Result:
MODIFY Available only to TPA. Refer to Chapter 4
VIEW Advances display to TERMINAL CONFIGURATION CONTROL menu (Paragraph 5-
1.1 )
SCROLL Advances display to TERMINAL AUDIT INFORMATION menu (Paragraph 5-1.1 )
BACK Returns display to TERMINAL MANAGEMENT menu ( Figure 5-1 )
Press SCROLL .
5-1.1 Terminal Audit Information
The TERMINAL AUDIT INFORMATION menu ( Figure 5-4 ) is available to all you. The menu is accessed
by pressing SCROLL in the Terminal Privileges, Associations, and Software Update Management menu
or if the STE is in an idle state by pressing
MENU , SELECT , SCROLL , and SCROLL .
To obtain the status of the current software, or to identify the TPA for the STE, select the TERMINAL
AUDIT INFORMATION menu. Refer to the menu hierarchy shown in Foldouts 2 and 4 and the default
setting shown in
Table 5-1 .
Figure 5-4. Terminal Audit Information Menu
NETWORK SETTINGS
SCROLL BACK SELECT
TERMINAL PRIVILEGES, ASSOCIATION
MODIFY BACK VIEW
AND SOFTWARE UPDATE MANAGEMENT
SCROLL
TERMINAL AUDIT INFORMATION
SELECT BACK SCROLL