Heavy Duty Code Reader
- 1 -
KC601 Heavy Duty Code Reader Main Unit Maintenance and Notes
* Do not allow unauthorized demolition.
* Avoid violent collision.
* Avoid closing to magnetic field.
* Do not keep in hot environment for a long time.
* Do not keep in cold environment for a long time.
* Avoid collision of screen and keep the keys clean.
* Clean the machine with soft clean cloth and neutral detergent, instead of water or
chemical solvents.
Automobile Inspection Notes
* Should operate the machine according to safety rules in auto repair industry.
Special attentions should be paid in order to prevent the machine from being affected
or damaged because of the environmental factors such as the surrounding pH,
poison gas, high pressure, heavy objects, etc.
* Vehicle batter fluid contains sulfuric acid, while sulfuric acid is corrosive to the skin.
Therefore, in operation you should protect your skin from directly contacting with
battery fluid. Particularly, make sure that they won’t splash into your eyes. You should
also avoid closing to fire.
* Engine exhaust emissions contains a variety of toxic compounds, so you should
protect yourself from inhaling them. During operating, the vehicle should be parked in
a well-ventilated place.
* The temperature of the working engine is high, so you should protect yourself from
contacting with high temperature components such as water tank and exhaust pipes.
* Before starting the engine, you should hold the hand brake and have gear lever
placed in neutral (Guide transmission) or P gear position(automatic transmission), so
as to avoid the vehicle rushing out and result in accidents when you start the engine.
*Before repairing the vehicles, you should hold parking brake well, shift transmission
gear into the neutral position or P gear, and lower the glass doors and windows on
the driver’s seat side.
* If the engine can be started, you should firstly warm up it to a normal temperature
(water temperature is at about 80
℃
, and close the auxiliary electrical appliances
(such as air conditioning, lighting, loudspeaker, etc.).
* Find the diagnostic socket of this car, and check, confirm that whether the wires of
the diagnostic socket are in good condition, and then connect the main unit for
diagnosis. Otherwise, do not test, and avoid damage to the main unit. If necessary,
you can use a multimeter to measure the voltage of diagnostic socket.
Instrument Use Notes
* When you use the KC601 for testing, you must handle it with care and keep it away
from heat source and electromagnetic field, so as to avoid interference with the main
unit.
* When electrical components are energized, you cannot disconnect the circuit to
prevent the self-inductance, mutual inductance from attacking sensors and
automotive ECU.
* When electrical equipment works normally, you should avoid putting magnetic
