WIRELESS COMPUTER
ENG 11
COMMERCIAL KRANKCYCLE COMPUTER
Before you start
your training:
• Make sure the channel setting of the console is in sync with
the cadence transmitter setting to allow proper cadence reading
• Turn on the computer console by pressing any of the two
buttons (Sun or Flow)
• Test if the console reads and displays your HR signal
transmitted from your personal HR chest belt properly
• The blinking of the Heart symbol on the computer display
indicates the reception of a compatible analog HR signal
• It may takes up to 3 seconds before the actual HR data
is displayed
• Choose your desired units, Miles or Kilometers
How to operate:
Miles/kilometers setting:
• Press the “sun” button for 5 seconds to enter setup mode.
Change unit setting from Miles to Kilometers by pressing the
“flow” button and confirm your choice by touching the “sun”
button again for 1 second.
Reset user data:
• Press the “flow” button for 3 seconds to reset all currently
stored user data such as time, distance and Kcal, average HR
and
RPM.
Engage light function:
• While operating the “sun” button briefly during exercise, the
display illuminates and automatically turns off after 5 seconds.
Training
info:
• Choose your desired training information displayed on the
lower part of the computer LCD by operating the “flow”
button” briefly during exercise. The display will shift
between time, distance, calories and scan.
• If you choose the Scan mode the display will alternate
between time, distance and calories.
ENG
