
Notice:
A: When testing, please naturally put your thumb on your watch in order to
avoid the test value is not correct.
B: Heart rate value changes at any time due to your condition. The main
factors are your exercise level, mood, breathing, etc. It is normal.
C: After some tests , please press [MODE] to exit heart rate mode, otherwise
the watch will keep detecting heart rate and result in power consumption.
HEART
RATE
MODE
As the picture , put your thumb on the induction loop and try to align with the
center of the heart rate sensor , and the forefinger on the opposite side. Holding about
5 seconds , the icon of heart will flash when signal has been found . After another 5
seconds, the heart rate value will display and change as the beating of your heart.
4