KLS24manual
www.kystar.com.cn
22
2
、
Receiving card parameter settings
The common IC and dual-latch IC mainly adjusts the test data clock frequency
and multiplier to refresh and debug to 1920, and the PWM chip mainly adjusts the
gray-scale clock frequency and refreshes and debugs to 3840.
Module select
：
Select the corresponding module manufacturer; check the module
specifications, driver chips and decoding chips.
Setting
：
According to the width and height of the module, the driver chip and the
decoding chip, the unit board loading file is made.
data line color
：
The arrangement of red, green and blue can be directly exchanged
without resetting intelligently.
Draw settings
：
The lamp panel is drawn and applied to small spacing and
unconventional lamp panels.
Set up single card loading
：
Receives the width and height of the cartridge load.
Multi-opening Setup and Cascade Direction
：
Set the multi-opening method and
rotation angle.
data set exchange
：
Exchange data sets and smart lookups.
Keep last frame after signal loss
：
Set the screen to be black or keep the last frame
