HOW TO USE
Remove all packaging materials from the blender. Completely untangle or
unwind the power cable of the unit.
Place blender pitcher on the motor base. This unit is equipped with a
safety device and the blender will not operate if the pitcher is not fixed
securely to the motor base.
Wash food to be processed in the blender then cut into small pieces not
larger than 1 inch. Put sliced fruits or vegetables inside the blender
pitcher.
Cover pitcher with the provided pitcher cover, then put refill cap in place.
Make sure that the power switch is turned to OFF and the speed control
knob at the lowest setting before connecting cord to the power supply.
Turn power switch to ON; blender will start operating at this point.
Rest hand on the container lid to support the unit while in operation.
Turn speed adjustment control knob clockwise from level 1 to 5.
To add ingredients while blending, remove refill cap and gradually add
ingredients into the small opening on the cover.
Remove refill cap then insert stirrer into the blender pitcher to mix
ingredients or help crush ice while blending.
Use pulse function when crushing ice or when processing hard foods in
the blender.
Allow blender to run for about 1 minute then turn OFF. Allow unit to rest
for about 1 minute then repeat process until the food that you are
processing is already well blended.
CLEAN AND CARE
After every use, wash movable parts of the blender with warm, soapy
water. You may also use the dishwasher to clean the blender pitcher, lid,
and refill cap of the blender unit.
The blender pitcher may be washed by putting water and a few drops of
liquid detergent on it. Place pitcher in the motor base then allow to
operate for about 10 seconds. Discard liquid then rinse blender container
thoroughly.
Never immerse blender motor in water. Clean motor housing by wiping
with a soft and damp cloth.
Never use abrasive cleaning agents or any metallic and sharp objects
(e.g. scrubbing brush or knife) for cleaning.
Wipe dry all parts of the blender using a soft and dry cloth.
Store blender in a cool and dry place.
Put back parts and accessories of the blender to their proper places
before operating again.
SERVICE
Do not operate your KYOWA Blender if the blender malfunctions or
appears damaged in any manner. Bring the complete product to the place
of purchase or to any authorized KYOWA dealers for inspection, repair or
replacement.
Do not disassemble your KYOWA Blender by yourself. No user serviceable
parts inside. Refer all needed repair to an authorized KYOWA service
facility ONLY.
3
4