IMPORTANT SAFEGUARDS
When using your Blender, basic safety precautions should always be followed:
Always operate your KYOWA Blender from a power source of the same
voltage and frequency rating as indicated on the rating label.
Do not place the unit on uneven surfaces. Place Blender upon a flat area
surface and far from the edge of counter top.
Do not use Blender in damp or wet area. Keep dry the exterior and the
base of the Blender.
Do not operate the Blender if any part of it has been damaged. Return
the appliance to the nearest authorized dealer or service facility for repair.
Do not operate or place any part of your KYOWA Blender on or near any
hot surface such as a gas or electric burner, hotplate or heated oven.
Do not use or replace accessories other than the ones originally provided.
Always ensure that the Blender pitcher is firmly attached to the motor
base before operating.
Always put in Blender pitcher lid before turning ON the unit.
Food to be processed in the Blender should not be larger than 1 inch.
Always ensure that the cover is tightly closed while the Blender is in
operation.
While operating, hold to support Blender pitcher cover to avoid any
untoward incidents.
Always choose the lowest setting first when using the Blender. Set higher
speed level if you notice that Blender is taking much time processing
food.
Use a rubber spatula to push or mix foods to be processed inside the
Blender. Make sure that the unit is turned OFF when mixing foods inside
the pitcher.
Do not overload Blender by putting too much food on the pitcher
exceeding the highest line indicated on the Blender pitcher.
Never leave the Blender unattended when in use.
Wait until the Blender has completely stopped processing before removing
pitcher from the base.
Switch OFF and unplug the Blender outlet before emptying, when not in
use or before cleaning.
Hold plug when unplugging from socket. Do not unplug by pulling the
supply cord.
CONGRATULATIONS
You are now a proud new owner of a KYOWA Blender model no. KW-4729.
Before using for the first time, kindly take time to carefully read your instruction
manual. Please observe all safety precautions and follow operating procedures.
After reading, kindly store your instruction manual in a safe place for your future
reference. Should you pass on this Blender to a third party, please hand over this
instruction manual as well.
PARTS DESCRIPTION
1
2
