KYOWA KW-1213 Instruction Manual Download Page 4

 

 

TROUBLESHOOTING 

 

PROBLEM 

POSSIBLE SOLUTION 

The appliance 

does not work. 

Make sure the voltage indicated on the appliance 

corresponds to the power supply voltage. 

Make sure the unit has been plugged in & switched ON. 

Water leaks out of 

the appliance. 

Check if the water tank is filled beyond the MAX level. 

The appliance 

produces a lot of 
noise and steam 

during brewing. 

Make sure the water tank is not filled with hot water. 

Appliance needs to be descaled (see CLEAN AND CARE). 

Coffee grounds 

enter the carafe. 

Check if the filter holder has overflowed because there is too 

much ground coffee in the filter, or the jug has not been 

placed correctly under the filter holder. 

Check if the filter is torn or you used the wrong size of paper 

filter. 

Brewing coffee 

takes longer than 

usual. 

Appliance needs to be descaled (see CLEAN AND CARE). 

Coffee maker 

switches off before 

water tank is 

empty. 

Appliance needs to be descaled (see CLEAN AND CARE). 

The coffee does 

not taste good. 

Check if you leave carafe with coffee on the hotplate too 
long, especially if it only contains only a small amount of 

coffee. 

The coffee is not 

hot enough. 

Check if the brewed coffee is too little. The coffee will warm 

longer if you brew more. 

Make sure you place the glass jug properly on the hotplate. 

The carafe is 

difficult to place or 

remove from the 

unit. 

Make sure the cover of the carafe & filter holder are in right 

position. 

Tilt the carafe a bit to place or remove it. Be careful not to 

spill the hot coffee for avoid getting scald. 

There is less 

coffee in the 

jug than expected. 

Check if you have not place the carafe properly on the 

hotplate preventing the coffee to pass through the valve. 

Appliance needs to be descaled (see CLEAN AND CARE). 

 

 

 

CLEAN AND CARE 

 

 

Wash  movable  parts  of  the  Coffee  maker  with  soapy  water.  Wipe  clean 
the outside surface with a soft, damp cloth. 

 

Never use abrasive cleaning agents or any metallic and sharp objects (e.g. 
scrubbing brush or knife) for cleaning. 

 

Remove lime scaling when you observe an excess of steam or if the coffee 

preparation time takes too long. If the water in your area is alkaline rich, 
it is highly recommended to remove lime scaling every two months. To do 

so: 

 

Place the empty Carafe on the Hotplate. Dilute two cups of vinegar 
in six cups of water and fill the reservoir with the mixture. 

 

Switch  ON  the  Coffee  Maker  for  a  minute.  Then  switch  OFF  and 

leave for half an hour. 

 

Discard the water and vinegar mixture, and then clean the Carafe. 

To eliminate vinegar residues, operate the Coffee Maker with water 
for two cycles. 

 

SERVICE 

 

 

Do  not  operate  your  KYOWA  Coffee  Maker  if  the  unit  malfunctions  or 

appears damaged in any manner. Bring the complete product to the place 

of purchase or to any authorized KYOWA dealers for inspection, repair or 
replacement. 

 

 

Do  not  disassemble  your  KYOWA  Coffee  Maker  by  yourself.  No  user 
serviceable parts inside. Refer all needed repair to an authorized KYOWA 

service facility ONLY. 

 

 

 
 
 
 

Summary of Contents for KW-1213

Page 1: ...72 J P RIZAL AVE CONCEPCION 1 MARIKINA IN FRONT OF KSERVICO TEL 696 6411 MOBILE 0942 0940088 TRONIX PASIG LOWER GROUND SERVICE LANE SM CENTER PASIG TEL 703 5599 234 9020 MOBILE 0932 1999372 CONTACT PERSON MS NORA CRESENCIO TRONIX SHAW MANDALUYONG 412 SHAW BLVD COR TORRES CALDERON ST MANDALUYONG CITY TEL 542 8360 725 7290 MOBILE 0923 1646350 CONTACT PERSON MS SHERLY DELA CRUZ TRONIX COMMONWEALTH LA...

Page 2: ...ion Switch OFF and unplug the Coffee Maker from outlet before filling emptying when not in use or before cleaning Allow Coffee Maker to cool down first before cleaning or replacing new ground coffee To reduce the risk of electric shock do not immerse or expose the Coffee Maker to rain moisture or any liquid Hold plug when unplugging from socket Do not unplug by pulling the supply cord This applian...

Page 3: ...ise until its tip aligns into the center of the filter To obtain mild coffee flavor point Aroma regulator in this button To obtain strong coffee flavor point Aroma regulator in this button Place the Carafe on the Hotplate Connect the Coffee Maker to the power outlet and press the switch The On Off Switch Indicator Light will indicate that the Coffee Maker is ON The unit will operate until the wate...

Page 4: ...r holder are in right position Tilt the carafe a bit to place or remove it Be careful not to spill the hot coffee for avoid getting scald There is less coffee in the jug than expected Check if you have not place the carafe properly on the hotplate preventing the coffee to pass through the valve Appliance needs to be descaled see CLEAN AND CARE 5 CLEAN AND CARE Wash movable parts of the Coffee make...

Reviews: