10
Auto Programs
4D Massage Programs
MyMemory Custom Massage
Getting Started
When massage chair is operating, press the
AUTO
button on the remote control to enter Auto Program
Menu. Choose from
Sports Refresh, Extension,
Rest & Sleep, Working Relief, Neck & Shoulder,
Waist & Spine, MemoryA,
or
MemoryB.
Press
OK
to enter the program you desire. Selected program
will show on the home screen.
As well as the programs in the AUTO section, there
are 3 additional 4D Massage programs. To access,
select
4D MASSAGE
from Home display, navigate
to MODE and then choose from
Deep shiatsu,
Healthy Breath
, or
Massage Extend.
Press
OK
to
enter the program you desire. Selected program will
show on the home screen.
To adjust the intensity or region of your 4D
Massage, press up or down button to navigate
among:
FORCE
and
PART
.
Your chair has the ability to save your favorite
customized massage programs to memory. To do
this,
create a manual massage program
(see page
16 for instructions) with all of your desired air, heat,
speed, and intensity settings.
Storing a memory program:
After creating your custom massage in manual
mode, select
AUTO
from the Home display and
scroll to the bottom of the page. Here you will see
Memory A
and
Memory B
. Press
OK
button to
select either A or B then select
“Save”
. If you save
over the top of an existing memory program, the
existing program will be erased and replaced by the
most recent save.
Loading a memory program
Select
AUTO
from the Home display
and scroll to the bottom of the page.
Select
Memory A
or
Memory B
and
then select
“Run”
. The chair will now
run the program you created.
