Racing Factory AC/DC C-80W -10A
28
To modify the discharge settings, press the START key so that the discharge current or discharge end
voltage starts to blink. Use the Inc and Dec keys to increase or decrease the discharge current or the
discharge end voltage (0.1V – 25.0V).
NiMH DISCHARGE
1.0A 5.4V
The cycle mode uses the current charge and discharge settings.
Launching the charge or discharge
Once you are ready to start the charge, discharge or cycling, press and hold the START key for three
seconds.
Battery type
Charge current Battery voltage
NiMH 5.0A 8.40V
CHG 000:40 00010
Mode
Charge time
Charged capacity
CHG = normal charge mode
DSC = discharge mode
While the charger is charging or discharging the battery, by pressing the START key and using the Inc
and Dec keys you can modify the actual charge and discharge current. Then, press the START key
again. You can use the Inc and Dec keys to change the information displayed on the screen. Please
refer to p.30 for information about the various screens available.
Once the charger has determined that the charge or discharge is complete, the charger stops and the
“FULL” or “END” message is displayed.
FULL 5.0A 8.40V
CHG 030:00 03000
D>C = discharge-charge cycle
C>D = charge-discharge cycle
Note:
you can stop the current process
at any time by pressing the STOP key.
Summary of Contents for 36306
Page 1: ......
Page 40: ...4 36306201403 1 ...
