— 3 —
#
CAUTION
•
When using Test Leads with alligator clip, be sure to check the alligator
clip is firmly connected to the metal part of the device under test.
Otherwise, inaccurate measurement or arc at the contacts may occurs.
•
The rated measuring voltage for insulation test is 500V.DC.
For electrical devices to be tested, if this test voltage seems not
proper to apply, contact your distributor and ask for advices.
•
When testing faulty device, it may trip the circuit breaker of main
power supply during test and may cause interruption of service. Be
careful when the same main power supply is used for PCs.
•
We are not liable for loss of data on PC during testing with this
instrument. The device under test (DUT) is powered on during most
tests, but please turn it to OFF position after use.
•
Use a cloth dipped in water or neutral detergent for cleaning the
instrument. Do not use abrasives or solvents.
2. Procedure of removing cover
KEW 6201A have a dedicated cover to protect against an impact from the
outside and prevent the operation part, the LCD, and the connector socket
from becoming dirty. The cover can be detached and put on the back side of
the main body during measurement.
2.1 Method of removing the cover
2.2 Method of storing the cover
Fig. 1
Fig. 2
